These are codes WR63, WR58 and WR71 respectively from the Front Rank WotR range.
- Posted using BlogPress
Monday, 4 November 2013
WotR WIP
Just some WIP shots of the 3 men-at-arms I'm working on at the moment. These are just about to receive washes and highlights for their clothing, belts, scabbards and my first attempt at a painted helmet (it appears quite bright at the moment but it will get much more colour depth as I apply the shading). The armour itself is actually finished, basically what I do with armour is dry brush the black undercoat heavily with Citadel Chain Mail paint then pick out the joins between plates, rivets etc with black. Some areas are also touched up with a detail brush (00) and the chain mail (if the figure has any) is washed with a thin black wash to make it appear different to the plate armour. The detail of the armour the designer has moulded on to these figures is really really good so they're actually quite rewarding to paint.
These are codes WR63, WR58 and WR71 respectively from the Front Rank WotR range.
- Posted using BlogPress
These are codes WR63, WR58 and WR71 respectively from the Front Rank WotR range.
- Posted using BlogPress
Saturday, 2 November 2013
WotR Basing & Painting
I've now based all of my finished WotR figures on 25mm round bases from Minibits:
Here's all 8 figures:
The method I've used for basing the figures is as follows:
1. Paint the figures metal base dark brown (in this case Coat D'Arms brown horse tone) before attaching it to the MDF base.
2. Coat the base (but not the top of the figures metal base) in PVA and cover in grit (approx 1mm round). Leave to dry.
3. Once dry paint the grit and base edge in dark brown, I tend to water down the paint to make it flow easier around the grit.
4. Using the Baccus basing system dry brush coats dry brush each colour on gradually reducing the amount of paint used for each of the three coats (base, mid and top).
5. Once dry seal the base with a layer of mat varnish - its important to do the edge as well as that helps protect it.
6. Apply static grass randomly to the base leaving some of the grit showing. The static grass used in this case also came from the Baccus Basing System.
Another thing I've also added is some of the Dux Brittaniarum movement trays from Warbases which I've painted/flocked to match the figure bases:
All of the trays come pre-assembled and the Minibits bases slotted in easily (that was a relief!). I'm quite impressed with these and will be adding more for this and other periods. The movement trays allow me to have individually based figures but still be able to move lots of them around easily and they increase my options as to how I can arrange the figures. The trays are available in 12 versions (2 slots up to 12 slots) and I picked up the two 5 slot ones they offer (2mm top layer types).
Finally here's another pair of archers I completed and based (stage 2) earlier today:
These are codes WR2 and WR20 from the Front Rank WotR range.
I've just cleaned up ready for painting another pair of archers and three more men-at-arms which will complete the first 3 'units' of 5.
- Posted using BlogPress
Here's all 8 figures:
The method I've used for basing the figures is as follows:
1. Paint the figures metal base dark brown (in this case Coat D'Arms brown horse tone) before attaching it to the MDF base.
2. Coat the base (but not the top of the figures metal base) in PVA and cover in grit (approx 1mm round). Leave to dry.
3. Once dry paint the grit and base edge in dark brown, I tend to water down the paint to make it flow easier around the grit.
4. Using the Baccus basing system dry brush coats dry brush each colour on gradually reducing the amount of paint used for each of the three coats (base, mid and top).
5. Once dry seal the base with a layer of mat varnish - its important to do the edge as well as that helps protect it.
6. Apply static grass randomly to the base leaving some of the grit showing. The static grass used in this case also came from the Baccus Basing System.
Another thing I've also added is some of the Dux Brittaniarum movement trays from Warbases which I've painted/flocked to match the figure bases:
All of the trays come pre-assembled and the Minibits bases slotted in easily (that was a relief!). I'm quite impressed with these and will be adding more for this and other periods. The movement trays allow me to have individually based figures but still be able to move lots of them around easily and they increase my options as to how I can arrange the figures. The trays are available in 12 versions (2 slots up to 12 slots) and I picked up the two 5 slot ones they offer (2mm top layer types).
Finally here's another pair of archers I completed and based (stage 2) earlier today:
These are codes WR2 and WR20 from the Front Rank WotR range.
I've just cleaned up ready for painting another pair of archers and three more men-at-arms which will complete the first 3 'units' of 5.
- Posted using BlogPress
Subscribe to:
Posts (Atom)